Server Hosting

[harbinger]

Could you tell me what I need to change to host games on this new nexus? None of mine pop up on the internet when I host them, but that's because they keep trying to register with stardock.net. -_-' What file must I change?

[sandtrooper]

#
# server.conf
#
# configuration file for Stellar Frontier Server (server.exe)
#
# Use this file to server command parameters.
#
# This file is parsed when the server.exe file is executed.  It will be
# overridden by any command line parameters (listed below):
#
# -logscreen            : Log output to console only
# -logfile              : Log output to file only
# -logall               : Log output to both file and console
# -lognone              : Log output to nowhere
# -autostart [STRING]   : Automatically start scenario file [STRING]
# -framerate [NUMBER]   : Set frame rate to [NUMBER] Hz (frames/sec).
# -updaterate [NUMBER]  : Clients to send updates every [NUMBER] frames.
# -aiupdaterate [NUMBER]: Server to send AI updates every [NUMBER] frames.
# -startintray          : Start the server minimized to the tray.
# -port [NUMBER]        : Use port [NUMBER] for incoming connections
# -nexus [STRING]       : Use [STRING] as the nexus
# -altnexus [STRING]    : Use [STRING] as the alternate(backup) nexus
# -timeoutsec [NUMBER]  : Time out connections after this number of seconds
# -maxlag [NUMBER]      : Maximum lag in msec to tolerate before booting
# -minF9period [NUMBER] : Min period of full gamestate downloads in seconds
# -maxF9 [NUMBER]       : Maximum number of full gamestate downloads
#                         0 = infinite (default)
#                         1 = Only once at login (F9 won't work)
#
# Examples:
#
# c:\>server.exe -logfile -autostart Sirius.dat sf.stardock.net
# c:\>server.exe -logfile -autostart Sirius.dat -framerate 16 sf.stardock.net
# c:\>server.exe -logscreen -autostart Sirius.dat -port 20002 sf.stardock.net
#
#
#        _____                                      _          _
#       | ____| __  __   __ _   _ __ ___    _ __   | |   ___  | |
#       |  _|   \ \/ /  / _` | | '_ ` _ \  | '_ \  | |  / _ \ | |
#       | |___   >  <  | (_| | | | | | | | | |_) | | | |  __/ |_|
#       |_____| /_/\_\  \__,_| |_| |_| |_| | .__/  |_|  \___| (_)
#                                          |_|
#
# This is an example! You will need to modify it for your specific needs!
#
#
# The rules here work on a "Last match wins" basis.
#



U just gotta copy the commands to make real ones. Remove the # (comments) to make the commands work.
You will need to copy all of this into a notepad file and rename it to this:

Server.conf

Basic config file should only need the -Nexus, -AltNexus and -Port lines.


You would place this file into the folder where the Server EXEs are. (Default location is {ROOT SF DIRECTORY} \ BinWin)

[harbinger]

Still not quite working. :/ I did this, and put it in the binwin. In short, it hasn't registered....

-port [NUMBER] : Use port [NUMBER] for incoming connections
-nexus [STRING] : Use [STRING] as the nexus
-altnexus [STRING] : Use [STRING] as the alternate(backup) nexus

[Geo]

replace the original server.conf
That's wat i did